Swan planter to give

Swan planter to give

Bend the rod in the form of doecke and insert in the done in the plug hole, fixing isotr pebbles, to seal the tile glue. Sleeps sand (wet) in a bottle and razdiraem slightly Boca…

Then cool the solution putty and seal film layer of mortar to the bottom of our pots, saivam zagotovka on a solution. With the help of a spatula and brush ableplanet whole bottle filler somewhere in 2 cm (instruments from time to time mokat ‘ in the water).

For the wings we need such a grid of 15 to 30cm. Slightly cocked, to shape the wing, pressed it into our procurement obliquely and immediately fix a small amount of putty. Wait 10-15 minutes while the putty to seize.

Irrigated our pens and take in one hand a little solution, PRIMEPOWER to the outer side of the wing, and the second hand hold it all inside. Similarly, received with the second wing. All the flaws we will fix later.

When the wings need to give a little dry, we are gradually moving on to the production of a neck. Again with wet hands form roller from the solution and attached to the rod. On the fly obtrusive wet piece bandage neck and bit crush all hands.

Fix the head and calmly go relax somewhere for 30 minutes.
After the blend of the second layer on the neck and head to our Swan.

Swan planter to give (2) Swan planter to give (3) Swan planter to give (4) Swan planter to give (5) Swan planter to give (6) Swan planter to give (7) Swan planter to give (8) Swan planter to give (9) Swan planter to give (10)

 

You can leave a response, or trackback from your own site.

Leave a Reply

Besucherzahler
счетчик для сайта