Small garden design

Small garden design

FLOWER BEDS

TREE BRANCH DECOR

CONSTRUCTION FOR SUPPORT

Preparation

We need:
1. metal-plastic water pipe
2. a piece of wood, in this case a lining
3. A piece of garden hose with a diameter slightly more than a water pipe
4. Self-tapping screws

Making workpieces: To create round parts, use a cylindrical object of the correct size, for example a barrel or a tank. Tighten the pipe around the barrel.

Spiral: You must receive at least two rings.

Cut rings: Divide the rings and then connect them using pre-prepared garden hose pruning.

Connecting: Do you remember the diameter of the hose? It should play the role of a tight connector.

Layout: Divide each ring into three parts. The marks should be marked at an angle of 120 degrees.

Mounting: In places with markings, screw the screws. With their help to the ring we will attach the legs.

Feet: Prepare wooden dots and beat them into trimming trumpets. It will take three such pipes.

Please note that only one side of the pipe is sufficient to drive the wooden dots.

We connect the top: The next step is to connect one of the rings with a straight pipe segment. Screws screwed into a wooden dostichku.

Repeat the operation for all three legs.

Connecting the bottom: At the final stage, connect the legs of the structure with the second ring. This time the screws can be screwed in the horizontal plane. Such a design will be very stable.

Done: Stand ready, left to put it on the bush. To do this, assemble the bush and fix it with a string. Then you can safely put the stand and remove the string.

CONSTRUCTION FOR THE CULTIVATION OF SEEDLINGS

HELP IN THE GARDEN

PLASTIC BOTTLES IN THE GARDEN

You can leave a response, or trackback from your own site.

Leave a Reply

Besucherzahler
счетчик для сайта