GIFT PACKAGING, SWAN

GIFT PACKAGING,

SWAN

GIFT PACKAGING, SWAN (1) Step 1. Manufacturer basket (base) baskets in the form of a Swan. For manufacturing reasons, we need an industrial two-layer cardboard. ????????????????????????

Cut the base in the form of an oval, which draw on the cardboard circle with a diameter of 8-10cm and a second circle with center on the line of the first round. Connect the edges of the circles together to get the oval. For walls cut out two cardboard strips the height of 6cm and 10cm. Iron strips with a rolling pin, to make it easier from them to bend oval. Glue a small strip around the base, see photo above. ???????????????????????? Next, glue the second strip, most around the first photo above. Bend the protruding portion is larger strips to the inside and glue. Thus, we have strengthened the rim of the oval. Flip the base and strengthen the seam walls and bottoms of the baskets, obliv his paper, see photo above.

???????????????????????? Finished the base of the basket — basket.

Step 2. The manufacturing bases of the wings, neck, head and tail of the Swan.

???????????????????????? From wire to create the shape of the wings, neck, head and tail of the Swan, as shown in the photo below.

????????????????????????

Next add volume to the frame neck and head, which, between the wires of the frame neck glued with tape rope type rope, as shown in the photo below.
???????????????????????? Give a final volume of head and neck of a Swan, which glued over the rope type rope, as shown in the above photos. ???????????????????????? The finished part of the head and neck baskets in the form of a Swan. ????????????????????????

The wings and tail of the Swan add volume, which glued over the wire frame with a rope, as shown in the photo above.

Step 3. Finalize the details. ???????????????????????? Details baskets Swan: the head, neck, wings and tail wrap the ribbon as shown in the photo. ???????????????????????? ????????????????????????

Step 4. Assembling the baskets.

???????????????????????? The result of the parts baskets Swan.

Step 5. Decorating baskets.Glue the parts baskets in the form of a Swan to the base. To enhance bonding assign the items to the cart using copper wire.

For registration of a basket of decorative fabrics manufacture the bag, cut out an oval on the basis of 1.5 cm longer. And a strip of cloth height 1.5 height of the walls of the basket. From these details will sew the bag. ????????????????????????
Will sadacharan this bag main part of the basket. As the bag will zadekorirovat wall halfway down (photo above), to the bottom of the walls cut another strip, of a height equal to the height of the walls of the basket and will sadacharan the bottom of the walls. ???????????????????????? ????????????????????????
The same cloth glued over the oval base and glued to the base of the basket, finishing decorating the main part of the basket photo below. ???????????????????????? Glued over the wings and tail beautiful guipure. The edges of the glued corrugated ribbon as shown in the photo above.Finish decorating baskets in the form of a Swan. Decorate corrugated ribbon neck and head of the Swan, and the seam on the wall of the cart basket. GIFT PACKAGING, SWAN (13)
We got a basket, which in itself is already a decoration. This is a great attribute of wedding decoration. Besides, this way you can decorate any gifts. Especially beautiful in this basket will look gift for a newborn. We are just a little gave free rein to their imagination and received a miracle like this!

You can leave a response, or trackback from your own site.

Leave a Reply

Besucherzahler
счетчик для сайта